Pine-Shaded Driveway Sealcoating in Bolton, MA
Tall pines frame this driveway and cast shadows across much of it. The asphalt runs from a wide apron at the street to a two-car garage, with a soft curve along the lawn near the house. Our crew handled driveway sealcoating in Bolton, MA, together with crack filling, edging the grass and a full cleaning. Cleaning comes first, because sealer only bonds well to a surface that is free of dirt, dust and loose debris. Edging the grass back along both borders exposes the true edge of the asphalt, so the coat covers the full width and the borders along the lawn look neat. In the photo you can see the fresh, even finish running from the road to the garage doors, with caution tape across the entrance to keep cars off while it cures. Brothers & Sons Sealcoating & Paving handles every one of these steps with its own family crew and no subcontractors.
Filling the cracks before sealing was the most important choice on this job. Sealcoating protects the surface, but sealer alone does not close a crack. Open cracks let rain and snowmelt reach the base below the asphalt. When that water freezes it expands, and each freeze-thaw cycle through a New England winter pushes the crack wider and loosens the pavement around it. Filling the cracks first keeps that water out, so the new coat has a sound surface to protect. Shade adds another reason. Driveways under tall trees stay damp longer after rain and snow, which gives water more time to work its way in. Plow blades and winter salt also wear on asphalt every year, and a fresh coat helps the surface hold up. As a family-owned sealcoating contractor based in Littleton, MA since 1999, Brothers & Sons Sealcoating & Paving recommends resealing a driveway every 2 to 3 years, and coal tar emulsion is available on request. Request a free estimate for driveway sealcoating in Bolton, MA before snow season.